English

MA Series Worm Screw Jacks

MA Series Worm Screw Jacks Featured Image
  • MA Series Worm Screw Jacks
  • MA Series Worm Screw Jacks
  • MA Series Worm Screw Jacks
  • MA Series Worm Screw Jacks
  • MA Series Worm Screw Jacks
  • MA Series Worm Screw Jacks

Ulwazi oluphambili:

Umthamo womthwalo:I-5 kN-350 kN njengesiqhelo
Izinto zeNdlu:GGG / cast steel / steel stainless
NONE1. Umgangatho 1 x Ibala 2. 2 x Pitch 3. Anti-Rotation (Keyed) 4. Stainless Steel 5. Left Hand Thread 6. Ball screw
Uyilo olukhethekileyo olukhoyo
IyaTshintshwa ngokobungakanani Nabanye Abavelisi:I-SERVOMECH
Ixesha lokuzisa:7-15 iintsuku
Umbuzo wakho kukuqhuba kwethu!


Iinkcukacha zeMveliso

Idatha yoBugcisa

Iithegi zeMveliso

Iimpawu (Imodeli A-Isikruru sokuHamba):

  • I-Intermittent Duty Cycle: Ifanelekile kwizicelo apho i-screw jack isebenza ngokukhawuleza.
  • Ukuthambisa: Ubomi obude begrisi eyenziwe ngegrisi ethambisayo yeentshulube iqinisekisa ukomelela.
  • I-Precision Worm Gearbox: I-ZI ibandakanya iprofayili yokuchaneka okuphezulu.
  • Imilinganiselo yebhokisi yeGear: Ukusuka ku-1:4 ukuya ku-1:36.
  • I-Monobloc Housing: I-Compact kwaye yomelele, eyenzelwe ukomelela kunye nokuqina.
  • Isantya segalelo: Ukuya kuthi ga kwi-1500 rpm.
  • Uhlobo lweScrew: Acme screw drive nge 1 okanye 2 iqala.
  • Ubungakanani obukhoyo: ubukhulu be-14, kunye ne-screw diameters ukusuka kwi-Ø18 mm ukuya kwi-Ø160 mm.
  • Umthamo womthwalo: Ukusuka kwi-5 kN ukuya kwi-1000 kN.

Izincedisi (Imodeli A):

  • Isixhobo soMda weStroke Ubude: Imagnethi okanye i-inductive sensors proximity controls.
  • Ulawulo lweNdawo: Iikhowudi ezongeziweyo okanye ezipheleleyo ezifumanekayo ukuze zibekwe ngendlela echanekileyo.
  • Ukuhambelana kweMoto: Ilungiselelwe iimotor ezisemgangathweni ze-IEC, iimotor ze-AC/DC, kunye ne-brushless servomotors.
  • Ukhetho Lwezindlu: Imingxunya ecofiweyo enemisonto okanye ikroba kwimingxuma yokufakwa ngeendlela ezininzi.
  • Iimpawu zoKhuseleko: Misa i-nut ukunqanda ukuhamba kakhulu, ukuvuthela okukhuselekileyo, isixhobo esichasene nokujika, kunye ne-nut yokhuseleko.
  • Iinketho eziKhethekileyo: I-Stainless steel attachments (AISI 303, 304, 316), izithambisi ezithe ngqo kwiqondo lokushisa, kunye nezithambisi ezikhuselekileyo kwishishini lokutya.

Iimpawu (iModeli B - I-Nut ehambahambayo):

  • Umjikelo woMsebenzi weThutyana: Kwakhona ulungele ukusebenza okwethutyana.
  • Ukuthambisa: Igrisi ehlala ixesha elide yokuthambisa igiya leentshulube.
  • I-Precision Gearbox: Ukuchaneka okuphezulu nge-ZI involute profile.
  • Imilinganiselo yebhokisi yeGear: Ukusuka ku-1:4 ukuya ku-1:36.
  • Izindlu: Uyilo olubambeneyo, olomeleleyo nolwakhiwo lwe-monobloc.
  • Isantya segalelo: Ukuya kuthi ga kwi-1500 rpm.
  • Uhlobo lwe-Screw: I-Acme screw drive nge-1 okanye i-2 iqala, kodwa isebenzisa uyilo oluhambahambayo lwe-nut.
  • Ubungakanani obukhoyo: 14 ubukhulu obuqhelekileyo, Ø18 mm ukuya ku-Ø160 mm acme screws.
  • Umthamo womthwalo: Ukusuka kwi-5 kN ukuya kwi-1000 kN.

Izincedisi (Umzekelo B):

  • Ulawulo lweNdawo: Iikhowudi ezongeziweyo okanye ezipheleleyo zokuchaneka.
  • Ukunyuswa kweeMoto: Iyahambelana neemotor ezisemgangathweni ze-IEC, i-AC/DC, kunye ne-brushless servomotors.
  • Ukhetho Lwezindlu: Imingxunya enemisonto eteyiweyo okanye kwimingxuma yokunyuka bhetyebhetye.
  • Iimpawu zoKhuseleko: Iintsimbi ezikhuselayo, i-trunnion mount, i-nut yokhuseleko, kunye ne-acme thread yokunxiba-level check check.
  • Iinketho eziKhethekileyo: Iziqhotyoshelo zensimbi engenasici, izithambiso ezikhethekileyo zobushushu obuphezulu/ obuphantsi, kunye nezithambisi ezihambelana neshishini lokutya.

Usetyenziso oluqhelekileyo:

Ezi jacks ze-Acme screw zifanelekile kwizicelo kwiindawo ezinzima, njengamasango amanzi, oomatshini bokwenza iphepha, kunye namashishini afuna ukuthembeka okuphezulu kunye nokusebenza.

  • Ngaphambili:
  • Okulandelayo:
    • SIZE (MA) - Trapezoidal-thread spindle MA5 MA10 MA25 MA50 MA80 MA100 MA200 MA350
    Umthamo womthwalo [kN], (tyhala-tsala) 5 10 25 50 80 100 200 350
    I-1-qala i-acme screw Tr18×4 Tr22×5 Tr30×6 Tr40×7 Tr55×9 Tr60×12 Tr70×12 Tr100×16
    Umgama wesixhobo seworm [mm] 30 40 50 63 63 80 100 125
    Umlinganiselo okhoyo RV 1:4(4:16) 1:5(4:20) 1:6(4:24) 1:7(4:28) 1:7(4:28) 1:8(4:32) 1:8(4:32) 3:32
    RN 1:16(2:32) 1:20 1:18(2:36) 1:14(2:28) 1:14(2:28) 1:24 1:24 1:16(2:32)
    RL 1:24 1:25 1:24 1:28 1:28 1:32 1:32 1:32
    I-Stroke [mm] ye-1 igalelo kwi-shaft revolution Umlinganiselo RV1 1 1 1 1 1.28 1.5 1.5 1.5
    I-RN1 0.25 0.25 0.33 0.5 0.64 0.5 0.5 1
    RL1 0.17 0.2 0.25 0.25 0.32 0.38 0.38 0.5
    Ukuqala ukusebenza kakuhle Umlinganiselo RV1 0.21 0.22 0.2 0.18 0.18 0.2 0.17 0.16
    I-RN1 0.16 0.15 0.16 0.15 0.15 0.13 0.12 0.14
    RL1 0.13 0.14 0.13 0.11 0.11 0.12 0.11 0.1
    Ukusebenza okusebenzayo kwi-3000 rpm Umlinganiselo RV1 0.4 0.41 0.38 0.37 0.39 0.41 0.38 0.39
    I-RN1 0.31 0.3 0.3 0.32 0.33 0.32 0.31 0.34
    RL1 0.27 0.28 0.28 0.26 0.27 0.3 0.28 0.29
    Ukuqala i-torque kwi-shaft yongeniso kwi-max. layisha [Nm] Umlinganiselo RV1 3.8 7.2 19.9 44.1 77 120 282 525
    I-RN1 1.2 2.6 8.3 24.8 47 62 133 400
    RL1 1 2.3 7.6 18 34 50 109 280
    Max. amandla okusebenza avumelekileyo [kW] Umlinganiselo RV1 0.4 0.6 1.2 2.4 2.5 3 4.5 8
    I-RN1 0.2 0.3 0.7 1.7 1.8 2.6 4 7
    RL1 0.17 0.25 0.6 1.2 1.2 2.3 3.8 6.8
    Itorque esebenzayo kwi-acme screw (nut) efunekayo kubukhulu. layisha [Nm] 8 20 65 165 368 525 1180 2880
    Izinto zendlu ukufakwa kwe-aluminium alloy ukuphosa ngentsimbi yegraphite engqukuva
    EN 1706-AC-AlSi10Mg T6 EN-GJS-500-7 (UNI EN 1563)
    Ubunzima be-screw jack ngaphandle kwe-acme screw [kg] 2.2 4.3 13 26 26 48 75 145
    Ubunzima kwi-100mm nganye yesikrufu se-acme [kg] 0.16 0.23 0.45 0.8 1.6 1.8 2.5 5.2

     

     

    IIMVELISO EZINXULUMENEYO